Thermaltake Pacific G1/4 Pressure Equalizer Stop Plug w/ O-Ring – Black

$7.99 USD

◆ Leak-free Design.
◆ Remarkable Expansion.

In stock

SKU: CL-W086-CU00BL-A Categories: ,

Product Description

Thermaltake Pacific G1/4 Pressure Equalizer Stop Plug w/ O-Ring – Black
The Pacific G1/4 Pressure Equalizer Stop Plug fitting is made for helping release excess air or pressure in your pump. Finished in chrome/black-plated copper, the G1/4 pressure equalizer plug is designed to install on the top of reservoir, and utilizes leak-free design with a preinstalled O-ring. Enjoy the ultimate in custom PC water cooling configurations with high quality components from Thermaltake.

Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.

Leak-free Design
Committed to deliver the highest quality, the fitting includes one preinstalled O-ring and allows proper connection to G1/4” thread, securing properly to any cooling components. Available in chrome and black finishes.

Remarkable Expansion
Thermaltake offers a full line of Pacific Series components for enthusiasts to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.


Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.

Additional Information

Weight 0.012 kg
Dimensions 1.8 x 1.8 x 1.29 cm

∮18 x 12.9 (H) (mm)




12 g



Screw Thread:

G 1/4


There are no reviews yet.

Be the first to review “Thermaltake Pacific G1/4 Pressure Equalizer Stop Plug w/ O-Ring – Black”

Your email address will not be published. Required fields are marked *