Pacific V-RTX 2080 Plus Series Founders Edition Pacific V-RTX 2080 Plus Series Founders Edition Pacific V-RTX 2080 Plus Series Founders Edition Pacific V-RTX 2080 Plus Series Founders Edition Pacific V-RTX 2080 Plus Series Founders Edition Pacific V-RTX 2080 Plus Series Founders Edition Pacific V-RTX 2080 Plus Series Founders Edition
Pacific V-RTX 2080 Plus Series Founders Edition

Pacific V-RTX 2080 Plus Series Founders Edition

Out of stock
P/N
CL-W240-CU00SW-A
USD$189.99

RGB full-cover water block for NVIDIA GeForce RTX 2080 Ti and RTX 2080 graphic cards that supports TT RGB PLUS software.

Pacific V-RTX 2080 Plus Series Founders Edition

Thermaltake Pacific V-RTX 2080 Plus Series Founders Edition is a full-cover water block for NVIDIA GeForce RTX 2080 Ti and NVIDIA GeForce RTX 2080, features CNC machined copper base, 0.5mm internal fin construction, and an aluminum alloy backplate. This high-performance water block fits most of G1/4 fittings, utilizes a universal mounting mechanism that offers tool-less installation, along with compatibility for custom PC builders. The water block is manufactured with a 16.8 million colors LED strip that supports TT RGB Plus software and synchronizes with ASUS, GIGABYTE, MSI, AsRock motherboard RGB softwares. The Pacific V-RTX 2080 Plus Series Founders Edition delivers the ultimate cooling performance for gaming, overclocking or other GPU intense tasks.

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiast standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.

TT RGB PLUS

TT RGB PLUS Ecosystem is the intelligent lighting system for PCs that combines the most advanced addressable LED lighting with Thermaltake’s patented TT RGB PLUS Software. TT RGB PLUS ecosystem provides nearly unlimited possibilities for playing with colors, synchronizing lights to games, music, CPU temperatures or other TT RGB PLUS products, including case fans, CPU/VGA waterblocks, AIO CPU coolers, PSUs, LED strips and peripherals. The patented software allows users to change the light modes, colors, speeds, brightness, fan speeds, and even supports AI voice control in iOS and Android devices.
Learn More

Patented TT RGB PLUS Software & App

Monitor the fan performance, adjust the fan speeds, and customize the lighting effects for Thermaltake Plus RGB liquid cooling products with the patented TT RGB PLUS Software and an exclusively designed mobile app. Choose a function from below and scroll down to read the details.

Taiwan Patent: 105216989

Learn More Download TT RGB Plus Software


*Compatibility:
- For desktop: Requires TT RGB PLUS Software 1.1.5 version or later.
- For iOS: Requires iOS 10.0 or later.
- For Android: Requires Android 6.0.0 or later with screen resolution 1920 x 1080.

SyncALL, Say “Hello TT” Thermaltake AI Voice Control

Talking to TT RGB PLUS App is an easier, faster way to set lights for your systems. You can ask it to turn the lights on or off, switch lights modes, dim the lights, change light colors, or adjust lights speeds or fan speeds.
Download Voice Input Command
- For desktop: Requires TT RGB PLUS Software 1.1.5 version or later.
- For iOS: Requires iOS 10.0 or later.
- For Android: Requires Android 6.0.0 or later with screen resolution 1920 x 1080.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and AsRock official websites.

Aura Addressable Header

Asus

Digital Pin Header

GIGABYTE

JRAINBOW Header

MSI

Addressable RGB LED Header

ASRock
Download RGB Motherboard Support List

*Caution: the motherboard signal connector only supports 5V header.

Graphic Cards Support List

Exclusive LED Strip Design

Controlled by the patented TT RGB PLUS Software and the app, the built-in LED strip features great light coverage, uniform color and brightness, and 12 addressable LEDs that can paint your build with 16.8 million colors.

Digital Lighting Controller

The controller is designed with a DIP switch on the back. Hence, you can set a number for each controller easily. You can add up to 5 devices to one lighting controller and up to 16 controllers to the software. The controller and the coding guide are included in all packs.

*It is recommended to connect up to 3 controllers on one peripheral cable (Molex) only.

Mirror-Finished CU Base

Manufactured with Thermaltake’s highest quality standards, the specially machined copper base has a mirror finish with anti-corrosive mating surface to the GPU that provides exceptional heat transfer for the most demanding use conditions.

High Water Flow Design

The coolant flow path includes all critical components. Proper cooling of these components contributes to overclocking stability and reliable operation. The block covers the entire PCB, leaving no components exposed to possible damage during handling.

Unique Micro-Channel Structure

Featuring a compact form factor with 0.5mm micro-channel fin construction guarantees optimal clearance and extreme heat dissipation. The copper base is compatible with most G1/4 fittings.

High Quality 4mm Thick Backplate

To prevent twist and bow on the PCB, an aluminum alloy made backplate is included in the pack. The backplate features 4mm thickness and can fully cover the backside of the GPU.

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks
1.To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
2.Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
3.It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
4.Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup
1.It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
2.Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
3.DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
4.Fill the reservoir to the top as it will prevent air from going into the pump
5.If necessary tilt the system slightly from side to side to bleed the air out of the loop.
6.Place some paper towels under fittings and joining points to test for leaks.
7.Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
8.Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
9.Coolant might fade over time.

TT RGB PLUS Software

2.0 - New version of Thermaltake’s TT RGB PLUS patented software, providing more lighting effects and PC monitoring functions.
1.0 - Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
Caution: TT RGB PLUS 2.0 and TT RGB PLUS 1.0 will overwrite one another; users can only install one version of TT RGB PLUS.

2.0 DOWNLOAD NOW 2.0 USER MANUAL
1.0 DOWNLOAD NOW LEARN MORE  

TT RGB PLUS Logo

Sync with Razer Chroma Lighting

All Thermaltake TT RGB PLUS products are able to connect into the Razer Chroma ecosystem, Razer Synapse 3. Users can experience synchronized gaming and RGB lighting effects on their TT RGB PLUS liquid cooling system and Razer gaming gear!

LEARN MORE

Razer Chroma Logo

Works with Amazon Alexa

All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to Alexa-enabled devices.

LEARN MORE

Amazon Alexa Logo

TT AI Voice Control

Give you full control over the TT RGB PLUS products with your voice. “SyncALL, Say ‘Hello TT”.
Download from App Store Download from Google Play

Note: TT AI Voice control and Amazon Alexa requires the use of at least one TT RGB PLUS software-enabled product to function.

TT AI Voice Control Logo

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

Category Caution
Chassis, ARGB Fan, ARGB AIO
  • The motherboard signal connector only supports a 5V header.
  • Make sure your motherboard software is the latest version.
RGB Memory, VGA Waterblock, Distro Plate
  • This product can only be used with either the TT RGB PLUS software or the dedicated motherboard software. Having more than two applications open may cause conflicts.
  • The motherboard signal connector only supports a 5V header.
  • Make sure your motherboard software is the latest version.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse, and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup:

  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminum, and steel).
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
  • DO NOT let the pump run dry. If no liquid is entering the pump, turn off your power immediately.
  • Fill the reservoir to the top to prevent air from entering the pump.
  • If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
  • Place paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W240-CU00SW-A
Dimensions 22.6 H x 131.2 W x 238.5 L mm
Weight 900 g
Interface USB 2.0 connectors (9 Pin)
System compatibility Windows 7 / 8 / 8.1 / 10
Power Input 6.5 W
Compatibility NVIDIA :
RTX 2080 Founders Edition
RTX 2080 Ti Founders Edition
Material Copper + Acrylic
Input Voltage 5 V
Threads G ¼”

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date
  • Manual
  • Multi-language
  • 2.7 MB
  • 2018-10-11

Drivers & Software

  • File Name
  • Description
  • Size
  • Version
  • Release Date
  • TT RGB PLUS Software
  • 1.Optimized RGB SYNC. (MSI motherboard)
    2.Update HAL.
    3.Minor bug fixes and system performance.
  • V 1.4.3
  • 2021-08-03
  • TT RGB PLUS Software
  • 1.Fixed the LCD monitor font size issue.
    2.Made minor bug fixes and system performance improvements.
  • V2.1.8
  • 2024-09-25