Pacific VGA Bridge Dual Series 2-Slot Transparent

$19.99 USD

◆ Designed Exclusively for Two Slot Distances.
◆ High Water Flow Design.
◆ Easy Installation.

재고 있음

파트넘버: CL-W135-PL00TR-A 카테고리:

상품 설명

Pacific VGA Bridge Dual Series 2-Slot Transparent
The new Pacific VGA Bridge Dual Series is the interconnect to link two graphics card water blocks together with ease, only compatible with the Pacific V-GTX 9 Series V2 and 10 Series VGA blocks. Featuring 12mm pass through ports and manufactured with high quality PMMA, the Pacific VGA Bridge Dual Series fits most of G1/4 fittings. Choose from: 2 slot and 3 slot to provide easier fitting installation and loop management.

Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.

Designed Exclusively for Two Slot Distances
The Pacific VGA Bridge Dual Series 2-Slot is designed for the PCI slots that are at a distance of two slots from each other.

High Water Flow Design
12mm pass through ports ensures high flow rates. The coolant flow path helps evacuate unwanted heat from the GPU, maintaining overclocking stability and reliability.

Easy Installation
Designed to fit Thermaltake Pacific V-GTX 9 Series V2 and 10 Series VGA blocks with universal mounting mechanisms, the Pacific VGA Bridge Dual Series allows enthusiasts to build superior water cooling systems from an aesthetic standpoint as well as incorporate modular chassis upgrades for the future.


Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.

추가 정보

무게 0.1 kg
부피 1.82 x 7.28 x 8.37 cm

18.2 x 72.8 x 83.7 mm (L x H x W)




G ¼”


100 g


아직 관련된 리뷰가 없습니다.

이 상품의 첫번째 리뷰를 남겨보세요 “Pacific VGA Bridge Dual Series 2-Slot Transparent”

이메일은 공개되지 않습니다. 필수 입력창은 * 로 표시되어 있습니다.